View 407F16JM_4457994.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Surface Mount Quartz Crystal FEATURES
* Standard 7.0x5.0mm Surface Mount Footprint * Stable Frequency Over Temperature and Drive Level * Frequency Range 8 - 100 MHz * Frequency Tolerance, 30 ppm Standard (10 ppm and 20 ppm available) * Frequency Stability, 50 ppm Standard (10,20,30 and 40 ppm available) * Operating Temperature to -40C to +85C * Tape & Reel Packaging, EIA-481-2 Compliant * RoHS/Green Compliant
Model 407
DESCRIPTION
The Model 407 is a ceramic packaged Crystal offering reduced size, ideal for high-density circuit board applications. The Model 407 offers reliable precision and excellent shock performance in wireless telecommunication devices.
ORDERING INFORMATION
MODE OF OSCILLATION * F = Fundamental T = 3RD Overtone FREQUENCY TOLERANCE @ 25C 1 = 10 ppm 2 = 20 ppm 3 = 30 ppm (standard)
407
M
FREQUENCY IN MHz M - indicates MHz and decimal point. Frequency is recorded with minimum 4 significant digits to the right of the "M". LOAD CAPACITANCE A = 10 pF G = 30 pF B = 13 pF H = 32 pF C = 16 pF J = 9 pF D = 18 pF K = 8 pF E = 20 pF L = 12 pF F = 24 pF S = Series
STABILITY TOLERANCE/TEMPERATURE RANGE
Over Operating Temperature Range (Referenced to 25C Reading)
1 2 3 4 5 6 7 8 9
= = = = = = = = =

10 20 30 40 50 20 30 40 50
ppm, ppm, ppm, ppm, ppm, ppm, ppm, ppm, ppm,
-20C -20C -20C -20C -20C -40C -40C -40C -40C
to to to to to to to to to
+70C +70C +70C +70C +70C (standard) +85C +85C +85C +85C
Example Part Numbers: 407F35A014M3181 (FO = 14.31818 MHz) 407T39A050M0000
Custom performance characteristics are available upon request. Use form C052 to detail non-standard parameters. Contact your local CTS Representative or CTS Customer Service for assistance.
* Prior to 11/7/06 the part number format did not contain this designator. These "Old Format" numbers (008-0261-0 Rev. E) are still valid with frequencies less than or equal to 48.0000 MHz as Fundamental Mode designs. Frequencies above 48.0000 MHz will be Third Overtone designs. Refer to PCM-1211 for more details.
Document No. 008-0261-0
Page 1 - 3
Rev. F
CTS Electronic Components, Inc. 171 Covington Drive Bloomingdale, IL 60108 www.ctscorp.com
7.0x5.0mm Low Cost Surface Mount Crystal
Model 407
ELECTRICAL CHARACTERISTICS
PARAMETER Operating Mode (Note 1) Crystal Cut Frequency Range Frequency Tolerance @ 25C
Electrical Parameters
VALUE Fundamental or 3RD Overtone AT-Cut 8.0 MHz to 100.0 MHz 30 ppm Standard
( 10 ppm and 20 ppm Available)
Frequency Stability Tolerance
(Operating Temperature Range, Referenced to 25C Reading)
50 ppm Standard
( 10 ppm, 20 ppm, 30 ppm and 40 ppm Available)
Operating Temperature Range Storage Temperature Range Equivalent Series Resistance Load Capacitance or Resonance Mode Shunt Capacitance (C0) Drive Level Reflow Condition, per JEDEC J-STD-020
-20C to +70C Standard
(-40C to +85C Available)
-55C to +125C See ESR Table See Ordering Information 4.0 pF Maximum
(2.5 pF 0.5 pF Typical)
25 W Typical, 100 W Maximum +255C 5C, 10 Seconds Maximum
EQUIVALENT SERIES RESISTANCE TABLE
FREQUENCY RANGE 8.000 MHz - 15.999 MHz 16.000 MHz - 50.000 MHz 30.001 MHz - 60.000 MHz 60.001 MHz - 100.000 MHz MODE of OSCILLATION Fundamental Fundamental 3RD Overtone 3RD Overtone ESR Maximum 60 Ohms 40 Ohms 100 Ohms 80 Ohms
MECHANICAL SPECIFICATIONS
PACKAGE DRAWING
( 7.00 0.20 ) 0.276 0.008
MARKING INFORMATION 1. ** - Manufacturing Site Code. 2. YWW - Date Code, Y - Last Digit of Year, WW - Week. 3. XXXMXXXX - Frequency marked with 4 significant digits after the `M'. 4. Complete CTS part number, frequency value and date code information must appear on reel and box labels.
4 ( 5.00 0.20 ) 0.197 0.008
3
CTS ** YWW XXXMXXXX
1 Top View 2
SUGGESTED SOLDER PAD GEOMETRY
( 1.20 ) Max 0.047 Key: ( 4.6 ) 0.181 ( 1.2 ) 0.047 ( MM ) Inch
0.087 [2.20]
0.055 [1.40] 4 3 0.100 [2.54]
( 1.0 ) 0.039
1
2 ( 2.54 ) 0.100
4
3
Bottom View
Notes: 1. Termination pads (e4), barrier-plating is nickel (Ni) with gold (Au) flash plate. 2. Terminations #2, #4 and the metal lid are connected internally. End user may connect these pins to circuit ground. Document No. 008-0261-0 Page 2 - 3
1 0.252 [6.40]
2
Key: [mm] Inch
Rev. F
CTS Electronic Components, Inc.
171 Covington Drive
Bloomingdale, IL 60108
7.0x5.0mm Low Cost Surface Mount Crystal
Model 407
TAPE AND REEL INFORMATION
DIMENSIONS IN MILLIMETERS 17.5 O13.5 4.0 8.0 O1.50 1.75 1.95 120 2.0
7.40
16.0
O60
O180
5.40 O21.4 DIRECTION OF FEED
Device quantity is 1,000 pieces per 180mm reel.
ENVIRONMENTAL SPECIFICATIONS
Temperature Cycle: Mechanical Shock: Sinusoidal Vibration: Gross Leak: Fine Leak: Resistance to Solder Heat: High Temperature Operating Bias: Frequency Aging: Insulation Resistance: Moisture Sensitivity Level: 400 cycles from -55C to +125C, 10 minute dwell at each temperature, 1 minute transfer time between temperatures. 1,500g's, 0.5mS duration, 1/2 sinewave, 3 shocks each direction along 3 mutually perpendicular planes (18 total shocks). 0.06 inches double amplitude, 10 to 55 Hz and 20g's, 55 to 2,000 Hz, 3 cycles each in 3 mutually perpendicular planes (9 times total). No leak shall appear while immersed in an FC40 or equivalent liquid at +125C for 20 seconds. Mass spectrometer leak rates less than 2x10-8 ATM cc/sec air equivalent. Product must survive 3 reflows of +260C peak, 10 seconds maximum. 2,000 hours at +125C, disregarding frequency shift. 1,000 hours at +85C, maximum 5 ppm shift. 500M Ohms @ 100VDC 15VDC. Level 1 per JEDEC J-STD-020.
QUALITY AND RELIABILITY
Quality systems meet or exceed the requirements of ISO 9000:2000 standards.
Document No. 008-0261-0
Page 3 - 3
Rev. F
CTS Electronic Components, Inc.
171 Covington Drive
Bloomingdale, IL 60108

▲Up To Search▲

Price & Availability of 407F16JM

	To Download 407F16JM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .